Wio Lite MG126

Wio Lite MG126

A cost-effective SAMD21 based development board with onboard MG126 Bluetooth Module.

• Microcontroller: SAM D21
• Digital I/O Pins: 14
• Analog Input Channels: 6
• DC Current per I/O Pin: 40 mA
• IO Input Voltage: 3.3 V
• SRAM: 32 KB
• Flash: 256 KB
• Maximum CPU Frequency: 48 MHz
• Bluetooth Core: MG126
• Frequency Band: 2.4GHz ISM
• Data Rate: 1Mbps air data rate
• Communication with MCU: SPI (Max. 4Mbps)
• Transmitter: Programmable output power: -28 ~ +4 dBm without an external RF PA 20mA at 0dBm output power
• Receiver: Integrated channel filters, -85 dBm sensitivity, Programmable LNA gain
• Antenna: On-board PCB antenna
• Max. Bluetooth Connect Distance: 10 m

Features:

• Arduino Zero Compatible/ Adafruit Feather Compatible
• 2.4GHz ISM band operation with 2MHz channel spacing
• 1Mbps air data rate
• Ultra-low-power

Wio Lite MG126 is a SAMD21 based development board with the MG126 Bluetooth Module. It is compatible with Arduino Zero and Adafruit Feather series, featuring 14 digital pins, 6 analog pins, and various communication ports. The MG126 Bluetooth Core offers a 1Mbps air data rate and can communicate with the MCU at speeds up to 4Mbps via SPI.

The board is equipped with a Type C interface for power and data transmission, along with a JST2.0 Li-Po battery port for portable power options.

MG126, the Bluetooth Core, is a 2.4GHz BLE RF transceiver with configurable registers and ultra-low power consumption. It supports a 1Mbps air data rate and can communicate with the Arduino core at 4Mbps via SPI.

* Images are for illustration only; actual product may vary.