ProtoBoard Pro-Double Sided

1.52

Introduction

This is a very basic double sided prototyping board with standard 0.1″ spacing with a 4x3mm (0.16×0.12″) holes for mounting. The leaf pads makes you great for quickly prototyping stackable circuits.You can not only solder DIP components but also solder SMD components.
You can solder the digital & analog IO pins and plug it into Arduino,so that the proto board can directy communicate with Arduino like a simple shield.See the following picture,a simple light water project with Arduino.

Specification

• Compatiblity:DIP & SMD components
• Mounting Holes:3x4mm (0.12×0.16″)
• Size:100x75mm (3.94×2.95″)

Documents

• Proto board pro_layerout

ShippingList

• ProtoBoard Pro -Double Sided x1

DFRobotHTMLDFRobot”DFROBOT-“DFROBOT-DFR0470-ENTDFR0470-ENTDFRobot

: DFROBOT-FIT0193