Audioarts DMX-12

Network ready and available in an 8-fader (DMX-8), 16-fader (DMX-16) and new 12-fader (DMX-12) frame with four program busses and bus-minus on every fader, the DMX console is often used in budget studios that serve backup to a main studio in a large facility or as the main studio console for smaller operations.The DMX console is marketed under the Audioarts brand and comes with a single AC powered rack mount engine with all the needed audio, logic, I/O and expansion ports for a single or networked studio. Optional Remote DMX is available for navigating, setting up and operating the DMX console from anywhere.Now with the addition of the WheatNet IP automation control protocol (ACI), the DMX console system provides full automation and playout integration and the ability to add touchscreen panels using WheatNet IPScreenBuilder tools.The DMX console system is WheatNet IP compatible, making this the only Audioarts value console with mix engine capable of expanding into full WheatNet IP networking capabilities.Main Features:Standalone production or on-air console with local inputs and outputs5-port Ethernet switch built into Audioarts Mix Engine – no need for an external switchControl surface sizes for 8-, 16-fader channelsWheatNet-IP protocol with 1Gb connectivity – any source to any faderBus Minus (N-1) on each input channelFour program output bussesFour event buttons for recalling entire console setups at the touch of a buttonPre-programmed processing presets for mic/voiceControl room, studio, and headphone jack (with built-in amplifier w/level control)Full EQ functions (4-band parametric with high/low pass and high/low shelving) and full dynamics (compression, limiting, and expansion) on every channelMulti-function channel-encoder knob with OLED display on each channel for control of EQ, dynamics, sources, pan, mode, and moreTalkback and cue functionsBuilt-in timerSix logic GP I/O ports for network control100% WheatNet-IP compatible with all BLADEs, Consoles, Processors, and SoftwareAudioarts Mix Engine is configured: 2 mic inputs on XLRs, with all additional I/O on RJ-45 connectors: 4 analog inputs, 4 digital inputs, 4 analog outputs, 4 digital outputs, 2 analog mic outputs, Headphone output, Cue output, Studio output, and Control Room output. There are also 5 ethernet ports that will interface directly with optional I/O Razor Interfaces, and a 1 Gb ethernet port for networking.Optional Razor I/O Interfaces can expand the system I/O with 8 stereo or 16 mono in and/or out; available in analog, digital or analog/digital versionNo External Switch NeededSource and ProgramFull Real-Time Parametric EQ and Dynamics Processing on Every ChannelTough ConstructionMix-Minus/Direct Output/TalkbackCue