
Designed for use with pianos, the ATM350PL UniMount mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument.When teamed with the included AT8491P magnetic piano mount and strong, flexible AT8490L 9″ gooseneck, the mic can be securely fastened to any metal portion of the piano and positioned to stay where you want it. The microphones cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.Main Features:Low-profile mic design for minimum visibilityCrisp, clear, well-balanced microphone response, even at high SPLsCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceUniMount magnetic piano mount attaches securely to the frame or other metal part of the piano, and provides excellent shock resistance for the microphoneRugged UniMount 9″ gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive playIn-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noiseInterchangeable elements available for hypercardioid and omnidirectional polar patternsIncluded violin mount with hook-and-loop fastener provides an additional mounting optionSpecifications:Element- Fixed-charge back plate, permanently polarized condenserPolar Pattern- CardioidFrequency Response- 40 20,000 HzLow Frequency Roll Off- 80 Hz, 12 dB/octaveOpen Circuit Sensitivity- 49 dB (3.5 mV) re 1V at 1 PaMaximum Input Sound Level- 159 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range- 130 dB, 1 kHz at Max SPLSignal-to-Noise Ratio- 65 dB, 1 kHz at 1 PaPhantom Power Requirements- 1152V DC, 3.5 mA typicalSwitches- Flat, roll-offWeight- Microphone: 14.5 g (0.5 oz)- Power Module: 90 g (3.2 oz)Cable- 4.0 m (13.1′) long (permanently attached to microphone)- 3.2 mm (0.13″) diameter- 2-conductor shielded cable with HIROSE HR10-type connectorDimensions- Microphone: 37.8 mm (1.49”) long, 12.2 mm (0.48”) maximum body diameter- Power Module: 92 mm (3.62″) long, 18.9 mm (0.74″) diameterOutput Connector- Power Module: Integral 3-pin XLRM-typeAccessories Included- ATM350a cardioid condenser microphone- AT8543 power module- AT8491P UniMount magnetic piano mount- AT8490L UniMount 9″ gooseneck- AT8468 violin mount (hook-and-loop fastener)- Protective carrying case
There are no reviews yet.