Adafruit NeoPixel Digital RGB LED Strip – Black 30 LED – BLACK

Original price was: $107.25.Current price is: $53.63.

SKU: BUPB54970708

These NeoPixel strips are a high-quality, affordable option for adding vibrant, individually controlled RGB lighting to your project. Each strip features 30 digitally-addressable LEDs per meter and is 12.5mm wide (10mm without the casing), perfect for compact designs. This version comes with a black flex PCB, offering the same functionality as the white version but with a different color mask.

Key Features:

  • LED Configuration: 30 RGB LEDs per meter, each individually addressable with 24-bit color (8-bit PWM per color).
  • Power Consumption: Maximum of 9.5 Watts (~2 Amps at 5V) per meter, typically drawing less current when displaying colorful designs.
  • Control: Uses timing-specific protocol for precise control, requiring microcontrollers with 100nS timing precision (e.g., Arduino Uno/Mega at 8MHz/16MHz). Not compatible with processors slower than 8 MHz.
  • Memory Requirements: Requires buffered memory in the microcontroller (e.g., Arduino Uno has about 1500 bytes available for up to 500 LEDs).
  • Flexible and Customizable: Can be cut every 1.3/3.4cm (1 LED), with copper pads for easy soldering and the ability to connect strips for longer lengths.
  • Weatherproof: The strip is encased in a protective sheathing, ideal for outdoor or exposed installations.
  • Power Supply: Requires a 5V DC power supply (5V/2A for up to 1 meter, 5V/10A for up to 10 meters). Never use more than 6V as it may damage the strip.
  • Connectivity: Comes with a JST SM connector on each end (2 or 3 pins) and separated power/ground wires for easy connection.

These strips come in 5-meter reels with connectors for easy installation. If you buy less than 5 meters, you’ll receive a cut piece from the reel, which may or may not have a connector. To wire, we recommend a 2.1mm DC jack to connect to a wall adapter for power, and a 2-pin JST set for data and ground connections.

Note: A proper power supply is essential for optimal performance. Avoid using higher than 6V to prevent damage to the strip.

There are no reviews yet.

Be the first to review “Adafruit NeoPixel Digital RGB LED Strip – Black 30 LED – BLACK”